Vex Robotic Parts in Solidworks
These Part are collected from a variety of sources including 3d Content Central and the Vex Wiki
GUSSETS AND BEARING BLOCKS |
|||||
Angle Gusset |
Pivot-Gusset |
Plus Gusset |
Bearing Flat |
Bearing Block |
Lock Plate |
BEAMS AND SHAFTS |
|||||
|
|
Beam-2000 |
Beam-3000 |
Shaft-2000 |
Shaft-3000 |
Shaft-12000 |
Clutch Post |
|
|||
NUTS AND BOLTS |
|||||
Nut |
Nylon Nut |
6-32 x .25" |
8-32 x .25" |
8-32 x .375" |
8-32 x .5 |
8-32 x .75 |
Thick Spacer |
Thin Spacer |
Washer |
Shaft Collar |
|
MOTORS AND GEARS |
|||||
Clutch |
*Motor |
12 Tooth Gear |
36 Tooth Gear |
60 Tooth Gear |
84 tooth Gear |
Linear Gear |
|
|
|
|
|
METAL |
|||||
5x15 Plate |
Angle 22-15 |
Angle 22-16 |
Angle-001 |
Bar-25 |
 15x2 Channel |
WHEELS |
|||||
*Large Wheel |
*Med Wheel |
*Small Wheel |
|||
MISC |
|||||
Power Connector |
*Recevier Module |
*Microcontroller |
Signal Connector |
Intake Roller |
*Limit Switch |
Custom Parts |
|||||
6x5 Flat Plate |
5x5 Channel |
15x5 Channel |
10x5 Channel |
1x10 Flat Bar |
1x9 Channel |
1x10 bent flat |
2.5 x 4 |
curved flat |
1x17 Flat Bar |
||
* Indicates STEP File. To use:
- Right Click on image.
- Select "Save Target As" (in IE)
- Save into working folder
- Open Part in Solidworks-You will need to change file type (Save As)
- Save Part as SolidWorks Assembly
- Insert .sldasm file into Assembly
Home
Classes
Instructor
